Pinouts of Connectors

KODAK CAMERA SERIAL CABLE pinout

layout
schematic diagram

add this page to bookmarks

This is the layout of the Kodak digital camera interface cable to a pc serial port, (used by KODAK DC40, DC50, DC120, DC240, DC280, DC3400, DC5000, RCA CDS4100, VIVITAR 3500, ROLLEI Model D7COM) to download the stored images from camera to pc.

8 pin MINI-DIN MALE connector pin-out & layout
8 pin MINI-DIN MALE connector  to the camera
Minidin 8 PinDB9 PinFunc
1,2,6not connected
32RxD
4,7,85GND, shorted in cable
53TxD

Alternative pinout:

Minidin 8 PinDB9 Pin
1-
2-
31
43
52
6-
74
81

Note: Pins 5,6,7,8 of the DB9 are joined together, while pin 9 is Not Connected.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
9 pin D-SUB FEMALE connector pin-outs & layouts
9 pin D-SUB FEMALE connector  to the computer
Pinouts.ru > Pinouts and schemes of devices cables and adapters >  Pinout of KODAK CAMERA SERIAL CABLE and layout of 8 pin MINI-DIN MALE connector and 9 pin D-SUB FEMALE connector

Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
70 hits since February 12, 2005