Pinouts of Connectors

Apple Macintosh Classic Internal Power connector pinout

layout
schematic diagram
add this page to bookmarks

Available at location J12 on the Apple Macintosh Classic logic board?

14 pin connector  at the motherboard
Pin Name
1 +12 volts
2 + 5 volts
3 + 5 volts
4 /VSYNC
5 /HSYNC
6 VIDOUT
7 Sound
8 -12 volts
9 PWM (Brightness control signal)
10 Ground
11 Ground
12 Ground
13 Ground
14 Ground

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of power supplyes >  Pinout of Apple Macintosh Classic Internal Power connector and layout of 14 pin connector

Source(s): Apple Tech Info Library 6532: Macintosh Classic, Internal Power connector Pinouts at Apple TIL homepage, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
74 hits since February 11, 2005