Pinouts of Connectors

Motorola T200, T205, T2688 mobile phones connector pinout

layout
schematic diagram
add this page to bookmarks

full pinout

14 pin Motorola mobile special connector pin-out & layout
14 pin Motorola mobile special connector  at the mobile phone (keypad up)
Full pinout (originally suggested for T200, T2688)
Mobile phone interface pinDescription
1Ext AUD MIC IN / JTAG TMS Use
2JTAG TRST Use
3GND / JTAG TMK Use
4Auxiliary Audio Out / JTAG TDI
5RS232_DSR
6RS232_RXD
7RS232_TXD
8RS232_DTR
9DATA ID
10I06 / JTAG TDO Use
11IOPN11 – EXT. Power 6V / 200 mA
12ACCID – Accessory ID (22 KOm)
13ACCIN
14GND
Pins 5 and 14 shorted in cable. (unconfirmed)

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of cellular phones connectors >  Pinout of Motorola T200, T205, T2688 mobile phones connector and layout of 14 pin Motorola mobile special connector

Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
133 hits since February 11, 2005