Pinouts of Connectors

Motorola V60, V70, V120, T280, T720, E398 mobile phones connector pinout

layout
schematic diagram
add this page to bookmarks

for data/flash cable only. For 120x, A835, A920, A295, A1000, C975, C980, E398, E550, E1000, T720, T720i, v60, v66, v66i, v70, v80, v300, v303, v400, v500, v501, v505, v525, v545, v547, v550, v600, v620, v975, v980 models.

17 pin Motorola V60 mobile special connector pin-out & layout
17 pin Motorola V60 mobile special connector  at the mobile phone (keypad up)
Mobile phone interface pin Description
1 GND
2 R=25KOm to GND
3 +6v
4 Tx
5 Rx
6 Vbus
10 GND
Pins 6,8 should be shorted.
Short pins 13 and 1 to flash.

USB pinout.
Mobile phone interface pin Description
1 GND
4 Tx (USB D-)
5 Rx (USB D+)
6 VBus

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of cellular phones connectors >  Pinout of Motorola V60, V70, V120, T280, T720, E398 mobile phones connector and layout of 17 pin Motorola V60 mobile special connector

Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
361 hits since February 11, 2005