Pinouts of Connectors

Nokia flasher cable scheme pinout

layout
schematic diagram
add this page to bookmarks

25 pin D-SUB MALE connector pin-out & layout
25 pin D-SUB MALE connector  to the computer
This cable should work with Nokia flash software.
BTEMP used only for entering into test-mode (you can press Power button every time before reading/writing instead of using this function)
Vpp used only with Nokia 3210!
Sometimes LPT port mode must be switched in the BIOS.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts and schemes of cellular phones cables >  Pinout of Nokia flasher cable scheme and layout of 25 pin D-SUB MALE connector

Source(s): GSMLab Kaljevic Dejan
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
317 hits since February 11, 2005