Pinouts of Connectors

Panasonic G60 mobile phone connector pinout

layout
schematic diagram

add this page to bookmarks

full pinout

14 pin Panasonic mobile special connector pin-out & layout
14 pin Panasonic mobile special connector  at the mobile phone (keypad up)
Pin Signal Description
14DLPWR Remote Power ON (IN)
13Tx_IrDA Transmit Data (OUT)
12SDO Data Out (OUT)
11Rx_IrDA Receive Data (OUT)
10CTS_MODEM/SDI CTS / Data IN (IN)
9RX_MODEM Receive Data (IN)
8TX_MODEM Transmit Data (OUT)
7RTS_MODEM/nSCS1 RTS / Chip select1 (OUT)
6DSR_MODEM DSR (IN)
5DTR_MODEM TPU in WATE Mode (IN)
4ACC_PWR Power Supply (IN)
3VACCID Analog Input (IN)
2SCLK Serial Clock (OUT)
1DGND Power Supply and Digital GROUND (GND)

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of cellular phones connectors >  Pinout of Panasonic G60 mobile phone connector and layout of 14 pin Panasonic mobile special connector

Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
70 hits since February 11, 2005