Pinouts of Connectors

Pantech 24 pin connector pinout

layout
schematic diagram

add this page to bookmarks

24 pin Pantech mobile special connector pin-out & layout
24 pin Pantech mobile special connector  at the mobile phone, looking into cable-side connector
1(24) +Vcharge
2(23) +Vcharge
3(22)* CTS / IO / USC5
4(21)* RTS / CLK / USC4
5(20)? FS / RI / USC3
6(19)*# +Vbat
7(18)*# +Vbat
8(17)? ACCDIENT
9(16)? FS / RI / USC6
10(15)* RX / CTS / GPIO_1
11(14)* TX / RTS / GPIO_3
12(13)* TXD / TX / USC2
13(12) "POWERON - Key <Send>. For activation connect to GND.
14(11)? "ACCDETECT
15(10)* RXD / RX / USC1
16(9)* CLK / USC0
17(8)# JTAGEN - For activation connect to Vbat.
18(7)# TDI / DAI1 / GPIO20
19(6)# TDO / DAI0 / GPIO21
20(5)# TMS / DAIRESET / GPIO19
21(4)# TCK / HSLDO0 / GPIO18
22(3)*# GND
23(2)*# GND
24(1)*# GND

* - Use for DATA-CABEL # - Use for JTAG (hi level specification by Analog Device)

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of cellular phones connectors >  Pinout of Pantech 24 pin connector and layout of 24 pin Pantech mobile special connector

Source(s): Pantech pinout
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
124 hits since February 11, 2005