Pinouts of Connectors

Parallel Port Loopback for Norton/PassMark pinout

layout
schematic diagram

add this page to bookmarks

Used to verify that a port is working. This one works with Norton Utilities: Norton Diagnostics and PassMark Software.

25 pin D-SUB MALE connector pin-out & layout
25 pin D-SUB MALE connector
Name Pin Pin Name
Data Bit 0 2 15 Error
Data Bit 1 3 13 Select
Data Bit 2 4 12 Paper Out
Data Bit 3 5 10 Acknowledge
Data Bit 4 6 11 Busy

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of Loopbacks >  Pinout of Parallel Port Loopback for Norton/PassMark and layout of 25 pin D-SUB MALE connector

Source(s): Technick.net
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
45 hits since February 12, 2005