Pinouts of Connectors

Philips mobile phones cable pinout

layout
schematic diagram
add this page to bookmarks

should work with Philips Savvy, Fisio, Az@lis, Ozeo, Genie mobile phones.

12 pin mobile special connector pin-out & layout
12 pin mobile special connector  to the mobile phone
In addition to drawn, pin 16 of Max232 must be connected with pin 9 of Max232 by R=1.5KOm.
These scheme should work with Philips Savvy, Fisio, Az@lis, Ozeo, Xenium mobile phones


Another scheme:

+3VDC(exactly) external power should be used for Philips Az@lis, Xenium, Ozeo (important!). Some users suggest using Max3232 despite of Max232 for this mobiles.
Pin 16 of MAX232 should be connected R=1.5KOm to the Serial out to work with Fisio.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
9 pin D-SUB FEMALE connector pin-outs & layouts
9 pin D-SUB FEMALE connector  to the computer
Related Links:
Pinouts.ru > Pinouts and schemes of cellular phones cables >  Pinout of Philips mobile phones cable and layout of 12 pin mobile special connector and 9 pin D-SUB FEMALE connector

Source(s): X_fil, Sanches pinout
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
107 hits since February 12, 2005