Pinouts of Connectors

Cisco RJ45 to DB25 Adapter pinout

layout
schematic diagram
add this page to bookmarks

25 pin D-SUB FEMALE connector pin-out & layout
25 pin D-SUB FEMALE connector  to the computer
Adapter DTE M/F Pins1 DCE M/F Pins MMOD Pins2
RJ-45 Pins DB-25 Pins
1 4 5 5
2 20 6 8
3 2 3 3
4 7 7 7
5 7 7 7
6 3 2 2
7 6 20 20
8 5 4 4

1 The FDTE RJ-45-to-DB-25 adapter is labeled "Terminal."
2 The MMOD RJ-45-to-DB-25 adapter is labeled "Modem."

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
8 pin RJ45 MALE connector pin-outs & layouts
8 pin RJ45 MALE connector  to the Cisco router
Pinouts.ru > Pinouts and schemes of serial ports cables >  Pinout of Cisco RJ45 to DB25 Adapter and layout of 25 pin D-SUB FEMALE connector and 8 pin RJ45 MALE connector

Source(s): Cisco Systems, Inc. and Technick.net
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
112 hits since February 11, 2005