Pinouts of Connectors

SFX Power Supply connector pinout

layout
schematic diagram

add this page to bookmarks

Same as ATX except that -5VDC is removed from pin 18

20 pin MOLEX 39-29-9202 connector pin-out & layout
20 pin MOLEX 39-29-9202 connector  at the motherboard
Pin Name   Color Description
1 3.3V   Orange +3.3 VDC
2 3.3V   Orange +3.3 VDC
3 COM   Black Ground
4 5V   Red +5 VDC
5 COM   Black Ground
6 5V   Red +5 VDC
7 COM   Black Ground
8 PWR_OK   Gray Power Ok (+5V & +3.3V is ok)
9 5VSB   Purple +5 VDC Standby Voltage (max 10mA)
10 12V   Yellow +12 VDC
11 3.3V   Orange +3.3 VDC
12 -12V   Blue -12 VDC
13 COM   Black Ground
14 /PS_ON   Green Power Supply On (active low)
15 COM   Black Ground
16 COM   Black Ground
17 COM   Black Ground
18 res     Reserved
19 5V   Red +5 VDC
20 5V   Red +5 VDC

18 AWG is recommended for all wires except pin 11, which should be 22 AWG For 300W configurations 16 AWG is recommended.

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
20 pin MOLEX 39-01-2200 connector pin-outs & layouts
20 pin MOLEX 39-01-2200 connector  at the cable
Pinouts.ru > Pinouts of power supplyes >  Pinout of SFX Power Supply connector and layout of 20 pin MOLEX 39-29-9202 connector and 20 pin MOLEX 39-01-2200 connector

Source(s): Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
103 hits since February 12, 2005