Pinouts of Connectors

Serial (SGI MiniDIN) connector pinout

layout
schematic diagram

add this page to bookmarks

Mini-DIN-8 serial port connectors are found on the Personal IRIS 4D/30, 4D/35, Indigo, Indy, and Indigo2. They are also found on the Origin 200 and Origin 2000 systems, used of MMSC/System controller ("Aux") port.

8 pin MINI-DIN FEMALE connector pin-out & layout
8 pin MINI-DIN FEMALE connector  at the computer
Pin Name Dir Description
1 DTR --> Data Terminal Ready
2 CTS <-- Clear to Send
3 TXD --> Transmit Data
4 GND --- System Ground
5 RXD <-- Receive Data
6 RTS --> Request to Send
7 CD <-- Carrier Detect
8 GND --- System Ground

Note: Direction is DTE (Computer) relative DCE (Modem)

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of serial ports >  Pinout of Serial (SGI MiniDIN) connector and layout of 8 pin MINI-DIN FEMALE connector

Source(s): Egon Kastelijn
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
69 hits since February 11, 2005