Pinouts of Connectors

SGI Open LDI pinout

layout
schematic diagram

add this page to bookmarks

Used on SGI digital flat panel monitors.

36 pin MDR36 SGI FEMALE connector pin-out & layout
36 pin MDR36 SGI FEMALE connector  at the computer

Standard by VICI
Protocol: LVDS

Pin Signal
1 Link2 D0-
2 Link2 DO+
3 Link2 D1-
4 Link2 D1+
5 Link2 D2-
6 Link2 D2+
7 NC
8 NC
9 GND
10 GND
11 NC
12 NC
13 Link1 D0-
14 Link1 D0+
15 Link1 D1-
16 Link1 D1+
17 Link1 D2-
18 Link1 D2+
19 Link2 D3-
20 Link2 D3+
21 Link2 CLK-
22 Link2 CLK+
23 DDD CLK SCL
24 VCC
25 GND
26 GND
27 NC
28 GND
29 NC
30 NC
31 NC
32 GND
33 Link1 CLK-
34 Link1 CLK+
35 Link1 D3-
36 Link1 D3+

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of video connectors >  Pinout of SGI Open LDI and layout of 36 pin MDR36 SGI FEMALE connector

Source(s): Monitor Pinouts
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
76 hits since February 12, 2005