Pinouts of Connectors

SGI serial port pinout

layout
schematic diagram
add this page to bookmarks

This connector can be found on Challenge, Onyx, Personal IRIS, and Power Series systems

9 pin D-SUB MALE connector pin-out & layout
9 pin D-SUB MALE connector  at the computer ?
Pin Name Description Color
4 TD Transmit Data Orange
3 RD Receive Data Black
2 RTS Request To Send Red
1 CTS Clear To Send Green
8 SG Signal Ground Brown
7 DCD Data Carrier Detect White
6 DTR Data Terminal Ready Blue

Note: O2, Octane, and Origin systems, have the IBM(R) PC/AT(tm) compatible pin assignments

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of serial ports >  Pinout of SGI serial port and layout of 9 pin D-SUB MALE connector

Source(s): Chan"s pinouts page
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
54 hits since February 12, 2005