Pinouts of Connectors

SGI Video connector pinout

layout
schematic diagram

add this page to bookmarks

13 pin 13W3 FEMALE connector pin-out & layout
13 pin 13W3 FEMALE connector  at the computer

Silicon Graphics manufacturers high end computers that are used in graphic rendering and CAD/CAM applications. This computer generally operates at two different frequencies (48 kHz and 64 kHz), which is determined upon boot up. This computer type outputs sync RsGsBs, RGsB, RGBS and RGBHV.

Normal Monitor

Pin Description
1 Monitor ID Bit 3, TTL
2 Monitor ID Bit 0, TTL
3 Composite Sync (Active Low), TTL
4 Horizontal Drive (Active High), TTL
5 Vertical Drive (Active High), TTL
6 Monitor ID Bit 1, TTL
7 Monitor ID Bit 2, TTL
8 Digital Ground
9 Digital Ground
10 Sync Ground

DDC Monitor

Pin Description
1 Data Clock (SCL)
2 Bi-directional Data (SDA)
3 Composite Sync
4 Horizontal Sync
5 Vertical Sync
6 DDC (+5VInput)
7 DDC Ground
8 Chassis Ground
9 Chassis Ground
10 Chassis Ground
R Red
G Green
B Blue

Signal type: analog

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of video connectors >  Pinout of SGI Video connector and layout of 13 pin 13W3 FEMALE connector

Source(s): SGI Octane Workstation Owner"s GuideTechnik-Tipps at AV Invest, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
83 hits since February 12, 2005