Pinouts of Connectors

Siemens A35, A36, A40, C25, C35, C45, M35, M35i, M50, ME45, MT50, S25, S35, S45, SL-42, SL45, 3118 mobile phones connector pinout

layout
schematic diagram

add this page to bookmarks

Applicable to A/C/S/M/SL 2x, 3x, 4x, 5x, x25, x35, 3508, s2588? Full pinout.

12 pin Siemens Lumberg mobile special connector pin-out & layout
12 pin Siemens Lumberg mobile special connector  at the mobile phone
Pin Name Dir Description
1 GND - Ground
2 SELF-SERVICE in/out Recognition/control battery charger
3 LOAD in Charging voltage
4 BATTERY out Battery (S25 only)
5 DATA OUT (TX) out Data sent
6 DATA IN (RX) in Data received
7 Z_CLK - Clock line for accessory bus. Use as DTC In data operation
8 Z_DATA - Data line for accessory bus. Use as CTS in data operation
9 MICG - Ground for microphone
10 MIC in Microphone input
11 AUD out Loudspeaker
12 AUDG - Ground for external speaker

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of cellular phones connectors >  Pinout of Siemens A35, A36, A40, C25, C35, C45, M35, M35i, M50, ME45, MT50, S25, S35, S45, SL-42, SL45, 3118 mobile phones connector and layout of 12 pin Siemens Lumberg mobile special connector

Source(s): Siemens C25/S25 pinout at Technick.net
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
596 hits since February 11, 2005