Pinouts of Connectors

SNES2 Video connector pinout

layout
schematic diagram
add this page to bookmarks

Available on the newer models of Nintendo SNES

12 pin SNES A/V MALE special connector pin-out & layout
12 pin SNES A/V MALE special connector  at the SNES
Pin Name Description
1 R Red (Requires 200 uF in series)
2 G Green (Requires 200 uF in series)
3 CSYNC Composite Sync
4 B Blue (Requires 200 uF in series)
5 GND Ground
6 GND Ground
7 n/c Not connected
8 n/c Not connected
9 CVBS Composite Video
10 +5V +5 VDC
11 L+R Left+Right Audio (Mono)
12 L-R Left-Right Audio (Used to calculate Stereo)

Note: Pin 3 is SCART Switch voltage (+11 VDC) on PAL machines

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
12 pin SNES A/V FEMALE special connector pin-outs & layouts
12 pin SNES A/V FEMALE special connector  at the video cable
Pinouts.ru > Pinouts of videogames connectors >  Pinout of SNES2 Video connector and layout of 12 pin SNES A/V MALE special connector and 12 pin SNES A/V FEMALE special connector

Source(s): Video Games FAQ (Part 3)Pinout from Radio Electronics April 1992SNES A/V Pinout at GamesX, from Hardware Book, Mark K
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
55 hits since February 12, 2005