Pinouts of Connectors

Sony CMD 1000 mobile phone connector pinout

layout
schematic diagram

add this page to bookmarks

full pinout

14 pin Sony CMD mobile special connector pin-out & layout
14 pin Sony CMD mobile special connector  at the cellular phone
Pin Description
1 Power (+ 9V)
2 Battery charge
3 Handsfree sos
4 Handsfree extern (10K resistor to +9 to enable handsfree functions)
5 TXE
6 RXE
7 Ignition (10K resistor to +9 to illuminate the display continiously)
8 Antenna extern (10K resistor to ground to enable external microphone and antenna)
9 Audio 1
10 Audio 2 (loudspeaker amplifier output)
11 Microphone (use electrect microfoon and 46 db preamp.)
12 Audio ground (do not connect to 13 and 14 )
13 Ground (supply)
14 Ground (supply)

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of cellular phones connectors >  Pinout of Sony CMD 1000 mobile phone connector and layout of 14 pin Sony CMD mobile special connector

Source(s): Sony CMD1000 pinout at Technick.net, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
64 hits since February 11, 2005