Pinouts of Connectors

Triplite OmniPro 675 UPS connector pinout

layout
schematic diagram

add this page to bookmarks

Pin Description
1 Common/Negative
2 External inverter shutdown, positive side
3 line fail, normaly open contact
4 return/external inverter shutdown negative side
5 line fail, normaly closed contact
6 low battery, positive side (2 minute warning)

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of different devices connectors >  Pinout of Triplite OmniPro 675 UPS connector and layout of connector

Source(s): Triplite OmniPro 675 UPS pinout at The Pin-Out directory, from Hardware Book
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
47 hits since February 12, 2005