Pinouts of Connectors

VESA-compliant P&D - EVC pinout

layout
schematic diagram

add this page to bookmarks

35 pin MOLEX "MicroCross" FEMALE connector pin-out & layout
35 pin MOLEX "MicroCross" FEMALE connector  at the videocard

The EVC connector is a combination analog and digital connector designed to carry VGA/RGB, FireWire, audio, and USB signals. The EVC connector is essentially the same as the DVI connector, except it carries different signals. It was designed to simplify computer-monitor connections and to carry video signals with a greater bandwidth that is possible with a VGA connector.

Pin Signal
1 TMDS Data 2 +
2 TMDS Data 2 –
3 Ground
4 Ground
5 Hsync
6 Vsync
7 Ground
8 CP+
9 1394 Pair Data 1 A –
10 1394 Pair Data 1 A +
11 TMDS Data 1 +
12 TMDS Data 1 –
13 Ground
14 TMDS Clock +
15 TMDS Clock –
16 USB Data +
17 USB Data –
18 Ground / 1394 SHIELD / CHARGING POWER INPUT-
19 1394 VG
20 1394 VP
21 TMDS Data 0 +
22 TMDS Data 0 –
23 Ground
24 Stereo Sync
25 Ground
26 DDC Data
27 DDC Clock
28 +5VDC
29 1394 Pair Data 1 B –
30 1394 Pair Data 1 B +
C1 RED VIDEO OUT
C2 GRN VIDEO OUT
C3 PX CLOCK OUT
C4 BLU VIDEO OUT
C5 COMMON GND RTN

Pins 8, 18 and 28 are recessed in the cable end connector (plug) to provide for proper power/ground sequencing. Signal Type: analog and digital. DDC = Display Data Channel. T.M.D.S. = Transition Minimized Differential Signal. USB = Universal Serial Bus

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
Pinouts.ru > Pinouts of video connectors >  Pinout of VESA-compliant P&D - EVC and layout of 35 pin MOLEX "MicroCross" FEMALE connector

Source(s): Matrox G200 Flat Panel Add-On - User Guide
Document status: unknown
mark as erroneous!
mark as correct
0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
102 hits since February 11, 2005