Pinouts of Connectors

1GB ethernet crossover cable pinout

layout
schematic diagram

add this page to bookmarks

1Gb ethernet is autosensing, so crossover usually not needed

8 pin RJ45 MALE connector pin-out & layout
8 pin RJ45 MALE connector
Cross over patch for 1 Gb Ethernet
T568B          
Name   NIC1   Color NIC2   Color Name
(BI_DA+) Pair2.1 1 White/Orange     3 Pair3.1     (BI_DB+)
(BI_DA-) Pair2.2 2 Orange     6 Pair3.2     (BI_DB-)
(BI_DB+) Pair3.1 3 White/Green     1 Pair2.1     (BI_DA+)
(BI_DC+) Pair1.2 4 Blue     7 Pair4.1     (BI_DD+)
(BI_DC-) Pair1.1 5 White/Blue     8 Pair4.2     (BI_DD-)
(BI_DB-) Pair3.2 6 Green     2 Pair2.2     (BI_DA-)
(BI_DD+) Pair4.1 7 White/Brown     4 Pair1.2     (BI_DC+)
(BI_DD-) Pair4.2 8 Brown     5 Pair1.1     (BI_DC-)

8 pin RJ45 MALE connector pin-outs & layouts
8 pin RJ45 MALE connector
Pinouts.ru > Pinouts and schemes of cables for local networks >  Pinout of 1GB ethernet crossover cable and layout of 8 pin RJ45 MALE connector and 8 pin RJ45 MALE connector

Document status: correct
mark as erroneous!
mark as correct
1 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
172 hits since February 11, 2005