Pinouts and schemes of cables for local networks
add this page to bookmarks
- 1GB ethernet crossover cable 1Gb ethernet is autosensing, so crossover usually not needed
- AAUI to AUI cable
- Ethernet 10/100Base-T Crossover cable This cable can be used to cascade hubs, or for connecting two Ethernet stations back-to-back without a hub. It works with both 10Base-T and 100Base-TX
- Ethernet 10/100Base-T Straight Thru cable This cable will work with both 10Base-T and 100Base-TX and is used to connect a network interface card to a hub or network outlet. These cables are sometimes called wipes.
- Ethernet 100Base-T4 Crossover cable This cable can be used to connect two computers together without a hub, or to connect two hubs together (without using an uplink port). If you´re connecting two hubs together and one of them has an uplink port, use a straight cable.
- Ethernet AUI to AUI cable This cable can be used to connect to network interface cards (with AUI connector) together, without use of transcievers
| Forum topic. |
what have i dont wrong? >> |