Pinouts of Connectors

Ethernet AUI to AUI cable pinout

layout
schematic diagram
add this page to bookmarks

This cable can be used to connect to network interface cards (with AUI connector) together, without use of transcievers

15 pin D-SUB MALE connector pin-out & layout
15 pin D-SUB MALE connector  to the network interface card 1
Name AUI1 AUI2 Name
TxD A 3 5 RxD A
RxD A 5 3 TxD A
TxD B 10 12 RxD B
RxD B 12 10 TxD B

And make the following jumper at each end:

Name Pin
Vc 6
Collision Detect B 9

This information should be correct, but may be not. You can help us to improve this webpage!
You can confirm this document to be correct (be careful), or report an error in document (error may be described in the following webpage). Result of your submission will be used for calculating document status shown at the bottom of this page.
15 pin D-SUB MALE connector pin-outs & layouts
15 pin D-SUB MALE connector  to the network interface card 2
Pinouts.ru > Pinouts and schemes of cables for local networks >  Pinout of Ethernet AUI to AUI cable and layout of 15 pin D-SUB MALE connector and 15 pin D-SUB MALE connector

Source(s): Usenet posting by Andrew J V Yeomans and Ren© Guzm¡n
Document status: unknown
mark as erroneous!
mark as correct		 0 report(s)
Click one of this links to change document status.
[Discuss at the forum] [Back to index] [Add new pinout]
[Report an error or update]
This information is maintained by pinouts.ru team and provided as a guideline only.
Efforts have been made to ensure it is correct, but it is the responsibility of the user
to verify the data is correct for their application.
108 hits since February 12, 2005